190
Quantity of
disqualifying samples
[Qn – T1]
Quantity of –T1 errors disqualifying
tested sample
Quantity of
disqualifying samples
[Qn + T1]
Quantity of +T1 errors disqualifying
tested sample
Blocking measurement
save with T1 [-]
Blocking of saving the measurement
that contains within -T1 error
Blocking measurement
save with T1 [+]
Blocking of saving the measurement
that contains within +T1 error
Blocking measurement
save with T2 [-]
Blocking of saving the measurement
that contains within –T2 error
Blocking measurement
save with T2 [+]
Blocking of saving the measurement
that contains within +T2 error
36.5. Control process start
In order to start con
trol process:
• Operator with permission level required for carrying out control process
has to log in.
Caution:
For detailed description on logging in procedure refer to ch. 11 of this user
manual. For detailed description on setting permission levels refer to ch.
19 of this user manual.
• Select respective product with correctly entered control process data,
• Enter the general working mode parameters to the weighing instrument
memory (in accordance with ch. 36.2 and 36.3 of this user manual),
• Unload the weighing pan,
• Press button (control process start) located on the bottom part of
the settings window. The window with information on entered data is
opened:
To Next Page
Loading...
