141
where:
Restart control
- information for an operator on a possibility to
resume a control process in progress
- Control resuming button
• Pressing the
button causes displaying a Logging in window
<Insert Password> with the name of previously logged operator.
• After entering a correct password and accepting it by pressing
key
the scale automatically returns to the control process in progress.
31.8. Non-destructive average tare control mode
Before sta
rting the control process the user can determine average tare
by weighing packages. The option is enabled by activating a function
<
Average Tare Estimation> in the PGC mode settings.
Tare control process is accompanied by below window:
Where:
Product
- Product name
Code
- Product code
To Next Page
Loading...
