235
Temperature
Temperature of the density determination
process
Sinker volume
Value of sinker’s volume immersed in tested
liquid
Weighing 1
Mass value of the 1 measurement
Weighing 2
Mass value of the 2 measurement
Weighing 3
Mass value of the 3 measurement
Pycnometer mass
Value of pycnometer’s mass utilized during
density determination process
Pycnometer density
Value of pycnometer’s volume utilized during
density determination process
38.5.5. Controls reports
Every control
procedure performed on the scale is sent to a printer and
saved in database <
Controls Reports>. Every saved control has its
unique number given at the moment it is completed.
Control number pattern:
X / y y / M M / d d / H H / m m / s s, where:
X - Controle mode:
U – regulation compliant control,
W – Internal control
Z – control terminated by an operator,
yy – the last two digits of year,
MM - month,
dd - day,
HH - hour,
mm - minute of control completion,
ss - second of control completion.
Users can view data from subsequent controls.
To Next Page
Loading...
