RADWAG PUE 7.1

233
38.5.2. Reports from dosing
Procedur
e:
• Enter < Reports> according to ch. 38 of this manual,
• Enter <
Reports from dosing> and press the required position.
List of data for a selected report from dosing:
Status
Status of correctness for a completed dosing process
Start date
Start date of dosing process
End date
End date of dosing process
Dosing process
Name of completed dosing process
Operator
Operator preparing a dosing process
Customer
Customer for which the dosing process is prepared
Number of
Measurements
Number of measurements within a completed dosing
process
38.5.3. Reports from recipes
Procedur
e:
• Enter < Reports> according to ch. 38 of this manual,
• Enter <
Report from formulation> and press the required position.
List of data for a specific report from a formulation:
Status
Status of correctness for a completed formulation
Start date
Start date of formula making process