RADWAG PUE 7.1

58
Means of operation:
The bar graph represents in a linear way the measuring range of a scale.
In addition, the bar graph can indicate weighing thresholds MIN, MAX,
if they have been determined:
• Signalization of mass below the value set in MIN threshold:
• Signalization of mass within MIN and MAX values of thresholds:
• Signalization of mass exceeding the value set in MAX threshold:
17.4.5. “Control” bargraph
„Control” bar graph is operated in < PGC> and< SQC> working
modes.
Description of bar graph operation in < PGC> working mode:
The bargraph features signalization points of:
• Nominal mass Qn declared for a product,
• MIN, MAX thresholds – if such are declared,
• Mass value for Qn-T,
• Mass value for Qn-2T,
• Mass value for Qn+T,
• Mass value for Qn+2T.