129
Edit
Add
Delete
Cancel
• Press “Add” and define a new ingredient of a formulation.
• After specifying all ingredients of a formulation go back to the main
window
by pressing
key.
30.4. Formula making process
Starting the
formula making process requires that the authorization
(access level) of the logged user is sufficient to start the process.
Caution:
1.
Starting the process requires that the logged user has access
level at least of an <operator>. If the logged user or anonymous
operator have access level set to <none> then on process start the
software displays a message: <Unauthorized access >.
2.
The Logging procedure is described in point 11 of this user
manual, and the procedure of determining the access level for
scale users is described in point 19 of this user manual
.
• Press an on-screen button
to select a required formulation.
• Enter to scale’s memory general parameters on the working mode
(in accordance with point 30.2 of this user manual),
• After returning to the main window of the <
Formulation> mode
press the on-screen function key
(process start),
• If the ingredient control mode is enabled, then the scale software opens an
editing window <Ingredient control> with a numeric keyboard and an
editing field for entering a correct code of the weighed ingredient using a
barcode scanner. Weighment of each following ingredient requires giving
its corresponding code.
To Next Page
Loading...
