197
Pressing key means getting back to the control in progress. Pressing
key means abort of the control. Abort of control results in getting back to
SQC mode setting window.
A report on control will be saved to <
Controls> database, report’s status -
<Terminated>.
36.8. Procedure of control completion
Produ
ct control completion can be carried out:
• Automatically
Control of all samples with quantity set in
<Sample quantity> parameter. Upon control process completion, a
summary of the process is generated (see ch. 36.11 of this user manual).
Carried out control process is automatically saved to the weighing
instrument database.
• Manually
Press previously set button (abort control). Upon pressing the
button, the following message is displayed:
Pressing
key means getting back to the control in progress.
Pressing
key means finish of the control. Finish of control results
in getting back to PGC mode setting window.
Caution:
Pattern and example of a report on control is described in point 36.11 of this
manual.
To Next Page
Loading...
