RADWAG PUE 7.1 User Manual

90
25.4. Checkweighing
In case of en
abling the checkweighing mode, printouts are performed only
when a weighing is between MIN and MAX thresholds that have been
defined before.
Procedure:
• Enter parameters group < Working Modes> according to ch. 25
of this manual,
• Enter the required working mode and choose <
Checkweighing>
then set the required option.
Options:
- Every weighing is recorded
- Only weighments between MIN, MAX are recorded.
25.5. Tare mode
This fun
ction enables users to set parameters for tarring.
Procedure:
• Enter parameters group < Working Modes> according to ch. 25
of this manual,
• Enter the required working mode and choose <
Tare mode>
and then set the required option.
Options:
Single
- Basic tare mode. The set (chosen) tare value is overwritten
after entering a new value
Current sum
- Summing up tare values of product and package together
with manually inscribed tare. After next setting of product
or package tare the entered tare value is disabled
Total sum
- Summing up all subsequently entered tare values
Autotare
-
Automatic tare mode together with mode <Sum of all>
Each
measurement
- Automatic tarring for each accepted measurement result.

RADWAG PUE 7.1 Specifications

General

Brand	RADWAG
Model	PUE 7.1
Category	Accessories
Language	English