RADWAG PUE 7.1

247
39.3.4. Example of process forming and its realization
Des
cription:
User must get through the following balance operation algorithm:
1. Carry out the operator logging process with the use of a transponder card,
2. Give a shift number,
3. Zero scales,
4. Information window „Prepare a product to be weighed” (message 60[s]),
5. Select a product by EAN code, use a barcode scanner,
6. Give a present price of a product,
7. Out of a list select „Country of origin”,
8. Select customer code,
9. Out of a list select „Supplier country”,
10. Give a lot number,
11. Give a batch number,
12. Information window „Start a weighing process”.
Identification process forming:
• Create a new record < Identification process> according to point
39.1. of this manual,
• Go to submenu < Process creator> to create further steps of the
process:
Step Function Description
1. Add custom variable
Variable type: numeric variable;
Name: shift number; assign to
custom variable 1
Displays „Shift number” dialog window
for edition with a numeric keyboard
2. Zero Zero Automatic zeroing
3. Delay
Time: 60s; Description: Prepare
a product to be weighed
Displays window „Prepare product to
be weighed” for 60 seconds
4. Select item from
database
Database: Product; selection
mode: Standard; start position:
1; end position: 0
Displays list of products. Configuration
and selection of data with the use of
barcode scanner is described in point
16.3 of this manual.
5. Edit product Variable type: Price
Displays window: „Record edition:
product / price” with a numeric
keyboard