98
• Enter the required working mode and choose < Peak hold> and then
set the required option.
Where:
- Scale operates in standard weighing mode
- Scale operates with mode forcing lock of maximum indication
on the display, i.e. peak hold.
• On loading the weighing pan with changeable force, the displays locks the
indication of the maximum measured force. The locked value is signalled
by red colour of the displayed value.
• Remove load from the weighing pan.
• Before carrying out the following measurement press
button.
25.10. Min 2, Max 2 thresholds active
You can declare additional Min 2, Max 2 thresholds (alerts). Enabling <
Min 2, Max 2 thresholds active> function causes:
• Possibility to declare Min 2, Max 2 thresholds using < Set MIN and
MAX> programmable button,
• Enabling operation of Min 2, Max 2 thresholds in product record,
• Enabling visualization of Min 2, Max 2 thresholds on the bar graph of
<
Signalling checkweighing ranges> type.
• Saving Min 2, Max 2 threshold in weighing record.
Procedure:
• Enter < Working modes> parameter group as described
in chapter 25 of this manual,
• Enter <
Weighing> working mode and enable < Min 2, Max 2
thresholds active> option.
To Next Page
Loading...
Need help?
General
