RADWAG PUE 7.1

27
LO Threshold
Last digit
14.1. Median filter
The medi
an filter is intended for eliminating short-lasting mechanical shocks.
Procedure:
• Enter < Weighing> according to ch. 14 of this manual, select
<
Median Filter> and then set an appropriate value.
Accessible settings:
None - median filter is off
0.5, 1, 1.5, 2, 2.5 - filtering level to choose
14.2. Filter
This filter is in
tended to suppress continuous mechanical vibrations at the
cost of stabilization time.
Procedure:
• Enter < Weighing> according to ch. 14 of this manual, select
<
Filter> and then set an appropriate value.
Accessible settings:
None, V.Fast, Fast, Average, Slow.
Caution:
The higher filtering level the longer stabilization time.