180
34.6. Executed transactions – reporting
Each compl
eted transaction is automatically saved and stored in the database
of <
Reports from Vehicle Scale>.
Each database record features the following data:
• Vehicle registration number,
• Transaction type (entrance, exit or control weighment),
• Transaction status (loading or unloading).
Additionally, the type and status of a transaction are marked by
a corresponding colour:
Green
– Transaction completed successfully
Yellow
– Transaction not completed
Red
– Transaction aborted
Detailed list of data for an executed vehicle transaction – see point 38.5.7
of this manual.
35. WORKING MODE - TRANSACTIONS
< Transaction> working mode enables recording weighings of products
being part of release, acceptance and transfer transactions. You can create
new transaction using the balance. It is possible to abort the transaction or
complete it.
35.1. Working mode activating procedure
Procedur
e:
• Go to the home screen and press button located in the top bar,
<Working modes> submenu providing list of available working modes is
displayed,
• Select < Transaction> mode, its home screen is displayed:
To Next Page
Loading...
