56
• If the mass value is over the MAX threshold red fields with red arrows
on the right are visible. The higher mass value the more red arrows
are visible.
Thresholds MIN and MAX are on the borders between red and green
fields.
17.4.3. Bargraph “Signalling of checkweighing ranges”
Settings of “Signalling check
weighing ranges” bargraph are accessible
in submenu “
Display / Bargraph / “Signalling
checkweighing ranges”:
MIN, MAX thresholds working
mode
Stable – signalling of MIN, MAX thresholds is
previewed on exceeding LO threshold and
reaching stable measurement result;
Unstable – signalling of MIN, MAX thresholds
is previewed on exceeding LO threshold
OK threshold working mode
Stable – signalling of OK thresholds is
previewed on exceeding LO threshold and
reaching stable measurement result;
Unstable – signalling of OK thresholds is
previewed on exceeding LO threshold
Min threshold signalling colour
Colour selection for signalling MIN threshold.
18 colours palette available.
OK threshold signalling colour
Colour selection for signalling OK threshold.
18 colours palette available.
Max threshold signalling colour
Colour selection for signalling MAX threshold.
18 colours palette available.
Gradient
Enabling / Disabling filling effect “Gradient”
type.
Background colour
Colour selection of a bargraph background.
18 colours palette available.
Frame colour
Colour selection of bargraph frame.
18 colours palette available.
To Next Page
Loading...
