108
28.1. Starting the operating mode
Procedur
e:
• While in the main window press in the top bar of the window then you
will see a submenu <Working Modes> comprising a list of modes,
• Choose mode <
Deviations>, the program will automatically
returns to the main window displaying icon
in the top bar,
• The weight unit is automatically changed to „%” and two screen
buttons on the right side appear:
Enter reference mass
Estimate reference mass
28.2. Local settings of the working mode
Local settings of the working mode < Deviations> are accessible
on pressing a hot key <
Local parameters>:
Save Mode
Detailed description in ch. 25.2 of the user manual
Down-weighing
Detailed description in ch. 25.3 of the user manual
Checkweighing
Detailed description in ch. 25.4 of the user manual
Tare mode
Detailed description in ch. 25.5 of the user manual
Labelling mode
Detailed description in ch. 25.6 of the user manual
Statistics
Detailed description in ch. 25.7 of the user manual
Information abort
saved measurement
Detailed description in ch. 25.11 of the user manual
Ingredient weight
entered manually
Detailed description in ch. 25.13 of the user manual
Standard printout
Detailed description in ch. 25.12 of the user manual
To Next Page
Loading...
