299
49. APPENDIX 03 – Label template
A label template can be created in 2 ways:
• From the indicator level using variables,
• Using PC software EDYTOR ETYKIET R02. A created project needs
to be saved as an „lb” file then copied on a pen drive that can be
connected to the indicator. Finally transfer the file to the database
in the scale.
While a label is in the database of labels it can be ascribed to products
or/and customers in order to work in labelling mode.
49.1. Designing a label from the indicator level
Procedure:
• Enter <
Databases> according to ch. 37 of this manual,
• Enter <
Labels> and press on the required position.
• After entering <
Label template> an editing field with the screen
keyboard appears
• Modify the existing template using the list of variables accessible
after pressing
,
• Confirm changes by pressing
.
Caution:
In the bottom line of the screen keyboard there are additional buttons that help
to modify a label template:
On-screen keyboard on / off
Read label templates from *.lb files (see – ch. 49.3)
Saving printout template in a file format *.lb (option enabled
on plugging a portable data storage device to scale port)
Select variables for the display template (inventory of variables
can be found in APPENDIX 01)
Clearing the editing field
To Next Page
Loading...
