RADWAG PUE 7.1

156
Report pattern:
In submenu < Printouts> users can edit the pattern of the average
tare report (see ch. 16.2.3). The default pattern is shown below:
Average Tare Report {301}
---------------------------------------
{40:Balance type:,-20}{44}
{40:Max:,-20}{34}
{40:d=e:,-20}{33}
{40:Factory number:,-20}{32}
{40:Date:,-20}{295}
{40:Product:,-20}{50}
{40:Tare:,-20}{54} g
{40:Value 0.25T1:,-20}{298} g
{40:Number of measurements:,-20}{299}
{40:Standard deviation:,-20}
{297}
{40:Result:,0}{296}
{40:Measurements:,-20}
{300}
.......................................
---------------------------------------
{143:0c}
31.14. Report from product testing
Repor
t example:
PGC Report U/26/09/09/10/59
----------------------------------------
Balance Type: WPY KTP
Max: 1.5/3 kg
d=e: 0.5/1 g
Factory Number: 123589
Start date: 2009.09.26 10:55:28
End date: 2009.09.26 10:59:53
Operator: Jan Kowalski
Product: AQUABA SAUCE
Batch Number: 123/09