53
Function keys and proximity sensors are programmable specifically for each
working mode. If a button has been attributed then it is equal to activating a
function. If no function is assigned to a button or sensor then it remains
inactive.
Procedure:
• While in optional working mode go to submenu < Display>
in accordance with point 17 of this user manual,
• Choose <
Button functions> and choose a required setting for
a chosen button: F1, F2, F3, 9 screen buttons or proximity sensors.
Caution:
The list of functions that can be attributed to keys or buttons is listed
in APPENDIX 02 of this manual.
17.3. Displaying platforms
If a scale is e
quipped with two platforms users can switch between platforms in
three ways:
• By pressing the platform number on the scale screen,
• By pressing a formerly defined button <
Change platform>.
• By activating in parameters all platforms that will be separately
placed in the main window of the program. In that case platforms
can be activated by pressing the area of this platform.
Caution:
The procedure of attributing functions to buttons is described in ch. 17.2
of this manual.
To activate all platforms press
, choose: „ Parameters /
Display / Show all platforms”, and set appropriately.
- Displaying all platforms disabled
- Displaying all platforms enabled
To Next Page
Loading...
Need help?
General
