22
Reading a printout template from a *.lb file
(active after connecting a pen drive)
Saving printout template in a file format *.lb (option enabled
on plugging a portable data storage device to scale port)
Variables for a printout template
One level up
Immediate exit to the main window
12.2. Return to weighing
Cha
nges made to the scale’s settings are automatically saved in the memory
on returning to the main software window. The scale provides two ways of
returning to the main window:
• By pressing key for a few times until returning to the main window,
• By pressing
key in the top bar, which causes immediate returning
to displaying the main window.
13. WEIGHING
Put a load on the weight pan. When pictogram
is displayed the
indication is ready to read.
Caution:
A weighing can be saved after stabilising a measurement (pictogram
).
13.1. Conditions of operational use
In orde
r to assure a long term operating period with appropriate measurements
following principles should be adhered to:
To Next Page
Loading...
Need help?
General
