132
Caution:
Submenu: “
Devices / Printer / Printouts / Formulation
report printout template” enables optional modifying of the report
template (see ch. 16.2.3 of this user manual).
Default form of the report template from formula making process:
----------------------------------------------
Formulation
----------------------------------------------
{40:Start date:,-25}{240}
{40:End date:,-25}{241}
{40:Name:,-25}{220}
{40:Code:,-25}{221}
{40:Status:,-25}{242}
{40:Measurements:,-25}
----------------------------------------------
{245:(50,-20) (7)(11)
(40:Nominal Mass:,-25)(246)(11)
(40:Difference:,-25)(247)(11)
----------------------------------------------
}
----------------------------------------------
{40:Mass:,-25}{244}
----------------------------------------------
The report from each completed formula making process is simultaneously
saved in the database of <
Reports From Formulation>, where the files
are named by their date and hour of process execution and formulation status.
List of data for the formula making process – see ch. 38.5.3 of this user
manual.
31. WORKING MODE – PGC (PREPACKAGED GOODS CONTROL)
Working mode < PGC> enables carrying out a control of prepacked goods
(single stand of network) that is supported by database containing list of
products and operators. A control started from a scale is completed
automatically after checking an appropriate quantity of packages (samples).
The scale allows for connecting it with a PC computer featuring computer
software E2R SYSTEM and thus forming a multiposition (network) system.
Each scale in the network system is an independent weighing stand, and data
on the control process is sent to the computer software on the real time basis.
To Next Page
Loading...
