RADWAG PUE 7.1

29
14.5. Last digit
The last digit option < Last digit> is to switch off the last digit of measured
mass indication – the measurement is carried out with decreased accuracy.
Procedure:
• Enter group of parameters < Weighing> in accordance with ch. 14 of
this user manual, select parameter <
Last digit> and set its desired
value.
Accessible settings:
Always
- Last digit always visible
Never
- Last digit always switched off
When stable
- Last digit visible only on stable indication of mass
15. COMMUNICATION
The scale can communicate with external devices via different ports:
• RS232 (1),
•
RS232 (2),
•
Ethernet,
•
Tcp,
• Wi-Fi.
The communication can be configured in parameters’ group
<
Communication>.
In order to enter <
Communication>, press and then:
„ Communication”.