RADWAG PUE 7.1

184
Transaction aborting:
• To abort the transaction, press button, the following message is
displayed: <Do you want to abort transaction?>.
• Press
button to confirm, the transaction is automatically displayed on
the list of aborted transactions.
• Aborting the transaction enables postponing it until it is re-selected from
the list. Once the transaction is aborted you can create new transactions
as well as continue and finish other transactions.
Transaction finishing:
• Finishing the transaction causes impossibility of products weighing for this
transaction.
• To finish the transaction press
button, the following message is
displayed: <Do you want to finish transaction?>.
• Press
button to confirm.
35.4. Reports on carried out transaction
Upo
n each completed transaction, the report is generated automatically.
Caution:
Submenu: “
Devices / Printer / Printouts / Transaction
Report Printout Template” enables optional modifying of the report
template (see ch. 16.2.3 of this user manual).
Default value of the transaction report template:
--------------------------------------------
Transaction {370}
--------------------------------------------
{40:Transaction type:,-20}{373}
{40:Start Date:,-20}{371}
{40:End Date:,-20}{372}
{40:Operator starting transaction:,-20}{377}
{40:Operator finishing transaction:,-20}{378}
{40:Target warehouse:,-20}{135}
{40:Source warehouse:,-20}{130}
{40:Customer:,-20}{85}
{40:Number of measurements:,-20}{374}
{40:Total:,-20}{375}
{40:Measurements:,-20}