RADWAG PUE 7.1

84
• After downloading the update press an active key which
is followed by displaying a message:
• Accept the message by pressing
key. The indicator shall restart
with update installing procedure.
23.2. Update from pen drive
Procedur
e:
• Copy file “update.pue71” containing the current software version onto
the external data storage device (to the main catalogue),
• Connect the data storage device to indicator’s USB port,
• Go to submenu <
Update> in accordance with point 23 of this user
manual,
• Go to parameter <
Update From pen drive> which displays the
following message: “Update?”,
Caution:
In case the data storage device is not connected to the indicator’s USB
port and/or there is no „update.pue71” file in the main catalogue of the
pen drive, the software displays the following message “Update error”.