RADWAG PUE 7.1

59
Where:
Qn – nominal mass
T – T error
2T – double T error
• Signalling mass below set value of Qn-2T:
• Signalling mass between the values of Qn-2T and Qn-T:
• Signalling mass between the value of Qn-T and Qn+T:
The bargraph field between the above values gets automatically rescaled
and it is additionally marked by a “magnifier” pictogram visible in graph’s
left corner.
• Signalling mass between the value of Qn+T and Qn+2T:
• Signalling mass above the set value of Qn+2T:
Description of bar graph operation in <
SQC> working mode:
The bargraph features signalization points of:
• Nominal mass Qn declared for a product,
• MIN, MAX thresholds – if such are declared,
• Mass value for Qn-T,
• Mass value for Qn-T2,
• Mass value for Qn+T,
• Mass value for Qn+T2.