136
Procedure:
• Enter submenu “
/ Databases”,
• Enter database < Products> and press required product record.
List of data definable for a control:
Pictogram Data name Description
Name
Product name
Code
Product code
Mass
Product nominal mass
Tare
Product tare value (set automatically on
selecting a product from the database)
PGC
-
PGC mode
Control type: Non-destructive Average Tare,
Non-destructive Empty-Full, Destructive Full-
Empty, Destructive Empty-Full
Lot size
Declaring quantity of a controlled batch
(Maximum value 999999)
Charge
Measuring series to be controlled: Non-
destructive Empty-Full, Destructive Full-Empty,
Destructive Empty-Full
Unit
Product’s weighing unit: [g] or [ml]
Density
Product density (range of entered values has
to contain between 0,1g/cm
3
and 5g/cm
3
)
Quantity of
packages
Declaring quantity of packages to be controlled
for determining average tare (for control type
“non-destructive average tare”)
Cyclic
displaying of
average tare
Turning on
/ turning off an option of
cyclic estimation of average tare for a product.
Interval of
average tare
determination
[h]
Value of time determining frequency of tare
control during a process of product control.
This means that estimation of average tare
for a product will be carried out in accord with
declared interval.
To Next Page
Loading...
