154
• Change functions of the hot-keys for the following screens: home
screen, settings and process screens. Enable hot-keys:
<
Set control 1> and < Set control 2> for the above screens.
Entering the “settings window” of a control causes displaying data
on a control identifying number of the enabled control:
Caution:
With a multiplatform scale, an operator using the parameter <
Platform> ma
has the option of assigning platform number to the current control.
After entering required data on a control and starting the control process,
the scale also displays data identifying the number of the enabled control:
To Next Page
Loading...
Need help?
General
