174
Caution:
1. Additionally, an operator can:
• Assign a product to a transaction by pressing
button,
• Assign a customer to a transaction by pressing
button.
2. Before starting a transaction, first an operator should select a
vehicle to be weighed. Otherwise the scale displays a message
<
Vehicle not selected>.
• After the vehicle enters onto the weighbridge (entrance), and
stabilizing
of the measuring result, accept the measurement by pressing
ENTER/PRINT button, which opens the following window:
Where:
PL 45332
8880 kg
2013.02.26 8:37
- A vehicle with saved registration number, accepted
mass on entrance and time and date of entrance
weighment
Exit
- Transaction type (exit)
Confirm weighing 2
- Message for an operator. The scale waits
for accepting the exit weighment
0 kg
- Mass of the load
To Next Page
Loading...
