RADWAG PUE 7.1

201
Batch size: 5000
Number of measurements: 15
[-T1] errors quantity: 1
[-T2] errors quantity: 0
[+T1] errors quantity: 0
[+T2] errors quantity: 0
Min: 477g
Max: 513g
Average: 501.87g
Total: 7528g
Standard deviation: 9.156314500829
Result: Positive
Measurements:
1. 490 g
2. 495 g
3. 504 g
4. 497 g
5. 504 g
6. 508 g
7. 508 g
8. 509 g
9. 513 g
10. 477 g
11. 500 g
12. 508 g
13. 508 g
14. 504 g
15. 503 g
........................................
----------------------------------------
Report pattern:
In submenu < Printouts> users can edit the pattern of the average tare
report (see ch. 16.2.3). The default pattern is shown below:
Control Report {279}
----------------------------------------
{40:Scale type:,-20}{44}
{40:Max:,-20}{34}
{40:d=e:,-20}{33}
{40:Factory number:,-20}{32}
{40:Start date:,-20}{261}
{40:End date:,-20}{262}
{40:Operator:,-20}{75}
{40:Product:,-20}{50}
{40:Batch number:,-20}{260}
{40:Nominal Mass:,-20}{53}{278}
{40:Tare:,-20}{54}g
{40:[-T1] error value:,-20}{266}{278}
{40:[-T2] error value:,-20}{267}{278}
{40:[+T1] error value:,-20}{280}{278}
{40:[+T2] error value:,-20}{281}{278}
{40:Batch size:,-20}{264}
{40:Number of measurements:,-20}{265}
{40:[-T1] errors quantity:,-20}{268}