51
The upper section of the workspace comprises a graphic information on which
of the three templates is enabled. Changing of the template is carried out by
dragging the workspace to the right or left.
Change of the displaying template is carried out in submenu:
“
/ Display / Text information”.
Procedure:
• While in an optional weighing mode enter submenu < Display>
in accordance with point 17 of this user manual,
• Select option <
Text information> and then a desired displaying
template, which is followed by displaying an editing field with is default
content and an on-screen keyboard,
• Edit the content of the selected displaying template and accept it by
pressing
key.
Caution:
There are additional buttons in the bottom line of the screen keyboard.
They can be used while modifying a display template. :
Screen keyboard on/off
Reading a template from a file with format *.lb (option enabled
on plugging a portable data storage device to scale port)
Saving printout template in a file format *.lb (option enabled
on plugging a portable data storage device to scale port)
Selecting variables for a template from a list (list of variables
is provided in the APPENDIX 01 of this user manual)
Clear the editing field
To Next Page
Loading...
Need help?
General
