87
Transactions
SQC
Work modes can be configured in <
Working Modes>. To enter submenu
<
Working Modes>, press and then: „ Working Modes”.
The settings of specific working modes provide access to special functions
adjusting operation of the instruments to customer’s individual needs.
Part of the special functions have global effect, i.e. they are applicable to most
of accessible working modes (except for working modes: Formulation, Dosing,
Vehicle scale), as presented on below table:
Save Mode + + + - + + + +
Down-weighing + + + - - - + -
Checkweighing + + + + + - + -
Tare mode + + + + + - + -
Labelling mode + + + + - - + -
Statistics + + + + + + + -
Differential weighing + - - - - - - -
Min 2, Max 2
thresholds active
+ - - - - - - -
Peak hold + - - - - - - -
Information about
saved measurement
+ + + - - + - +
Ingredient weight
entered manually
+ + + - - - - -
Standard printout + + + + - - - -
Other special functions are related directly to a specific working mode, and they
are described in further part of this user manual.
To Next Page
Loading...
