4-46 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Troubleshooting
Exit Sensor
1. Enter Service Diagnostics (page 4-11).
2. Use the Up and Down Arrow buttons to select Printer > IOT Diag > DI-4.
3. Operate the actuator to check sensor function.
4. Confirm the number shown on the display increases every time the actuator is
operated.
5. Press the Stop button to stop the test.
Paper
s6000-143
Exit Sensor Actuator
Paper
To Next Page
Loading...
