Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 2-13
Theory of Operation
Neutralization
In the neutralization process, the charge on the paper is neutralized or eliminated
by the eliminator. If the charge was not removed, the toner on the paper would
spread over the surrounding metal surfaces.
The eliminator is a metal sheet that is held at the ground level. The eliminator is
installed several millimeters away from the backside of the belt.
s6000-063
Eliminator
Paper
2nd BTR
Belt
: Negative electric charge
: Positive electric charge
: Toner
To Next Page
Loading...
