a. Sit the bracket on the locating pins on the upper frame and in the grooves on the bottom of
the tray.
b. Tighten the thumb screw so it locks the postcard bracket in place.
5. Load the postcard stock SEF and against the right side of the tray.
6. Adjust the paper guides against the stock.
7. Close the paper tray and confirm the new settings at the print server.
8. Run your print job.
9. Upon completion of your print job, remove the postcard stock and the postcard bracket from the
tray.
178
Xerox
®
Versant
®
4100 Press
User Documentation
Working With
To Next Page
Loading...
