Xerox WorkCentre 7132

Properties
Xerox WorkCentre 7132 User Guide 205
Emulation Settings TIFF
Allows you to configure the settings when TIFF is enabled.
Logical Printer Number – Enter the logical printer number and click
the [Edit] button.
Memory Settings – Allows you to select a memory setting when the
machine is switched off/on.
TIFF Logical Printer Settings:
Document Size – Allows you to select image size or standard size.
Paper Tray – Allows you to select the paper tray.
Output Size – Allows you to select the paper size.
Output Destination – Allows you to select the destination for your
output.
Print Quantity Setup – Allows you to select the Print Quantity Setup
that has priority over other settings.
Quantity – Enter the number of sets to print when stored jobs is
selected for Print Quantity Setup.
2 Sided Print – Allows you to select whether to print on both sides of
paper.
Origin – Allows you to specify the origin of the coordinates.
Image Orientation – Allows you to select the orientation of the
document.
Multiple-Up – Allows you to specify settings for Multiple-Up.
Zoom – Allows you to specify the zoom ratio.
Variable Y% – Allows you to specify the Y% between 25 and 100%.
Variable X% – Allows you to specify the X% between 25 to 100%.
Up/Down Adjustment – Allows you to specify a value between -250
and 250 mm (-9.8–9.8 inches) to adjust the vertical position.
Left/Right Adjustment – Allows you to specify a value between -250
and 250 mm (-9.8–9.8 inches) to adjust the horizontal position.
Paper Margin – Allows you to specify a value between 0 and 99 mm
for the paper margin.
Output Color – Allows you to select the output color mode.
Collated – Allows you to specify whether to collate the output.
Stapling – Allows you to select the stapling method.
Image Enhancement – Allows you to enable or disable image
enhancement.
Bypass Tray - Wait User – Allows you to specify whether to enable or
disable this feature when Tray 5 (Bypass) is selected.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals