10 Setups
274 Xerox WorkCentre 7132 User Guide
Rotate 90 degrees
Specifies whether to rotate the image to be sent automatically without reducing the
image size as far as possible when you select [Auto %] in the [Reduce/Enlarge] feature.
Mixed Sized Originals Scan Mode
Specifies when scanning the document contains the mixed paper sizes.
Sender ID
Specifies whether to notify the remote machine of the machine’s G3-ID (fax number)
when you send documents with G3 in the [Communication Mode].
Save Undelivered Faxes
Specifies whether to save fax documents that could not be sent. Select [Yes] to display
the resent feature in the [Stored Documents] tab on the [Job Status] screen, from where
you can resend the fax document.
Save Cancelled Faxes
Specifies whether to store fax documents where the fax transmission was forcibly
cancelled.
Saved Faxes - Auto Delete
Specifies whether to automatically delete stored documents.
Transmission Interval
Specifies the period between transmissions within the range of 3 to 255 seconds using
the scroll buttons or the numeric keypad on the control panel. The longer the
transmission interval, the longer the total time spent for operation, but the machine can
receive faxes during the standby time.
Batch Send
Specifies whether to send pending documents to an identical destination as a batch
with a single transmission thereby reducing telephone charges.
Manual Send/Receive Default
Specifies the default for whether the [Manual Receive] or [Manual Send] button is to be
selected when you use the [On-Hook] feature.
Fax Receiving Mode
Specifies the default for fax reception mode. Select from [Auto Receive] and [Manual
Receive].
Border Limit
Specifies the value to divide a document onto two pages when the received documents
are longer than the loaded paper size. Enter a value within the range of 0-127 mm (0-
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
