Xerox WorkCentre 7132 User Guide

Setup Menu
Xerox WorkCentre 7132 User Guide 291
NOTE: Depending on the selection for [Address Type] in step 4, the following items
are displayed on the screen.
With [Fax] selected:
Item Description Default
Fax Number Enter a fax number (up to 128 digits). -
Recipient Name Enter a recipient name (up to 18
characters).
-
Index Enter a single alphanumeric character to
use as a keyword for searching the
Address Book.
-
Relay Station Setup Specify whether or not the registered
Address Number is to be identified as an
initiating relay broadcast station when the
machine is used as a relay broadcast
station.
NOTE: Before using the Relay Broadcast
feature, enter the Address Numbers for
initiating stations regardless of the
initiating method from the stations.
Off
Communication Mode Select a communication mode from
among [G3 Auto] and [F4800].
G3 Auto
Resolution Select a resolution level to be used for
transmission, from among [Panel],
[Standard], [Fine], [Superfine (400dpi)],
and [Superfine (600dpi)]. With [Panel]
selected, the resolution level selected on
the control panel is used.
Panel
Cover Note Specify whether or not to attach a Cover
Note. If you select [On], then select a
comment for a recipient and/or a sender.
NOTE: Unless registered beforehand,
comments cannot be selected. For
information on how to register comments,
refer to Comments on page 295.
Off
Maximum Image Size Select the maximum image size,
depending on recipients’ paper size, from
among [A3], [B4], and [A4]; or among [8.5
x 11"], B4, and [11 x 17"] (depending on
the country).
11 x 17"
Delayed Start Select whether or not to specify the
transmission start time. If you select [On],
then specify the start time.
Off
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English