Xerox WorkCentre 7132

10 Setups
292 Xerox WorkCentre 7132 User Guide
With [Internet Fax] selected:
Remote Mailbox Specify whether or not to send as
confidential fax documents. If you select
[On], then enter the recipient’s mailbox
number (3 digits) and password (4 digits).
Off
F Code Specify whether or not to perform F Code
transmission. If you select [On], then
enter the appropriate F Code and
password.
Off
Relay Broadcast Specify whether or not to use the machine
as an initiating relay broadcast station in
order to use the registered Address
Number as a relay station. If you select
[On], enter a Relay Station ID, Broadcast
recipients, and Print at Relay Station.
Off
Item Description Default
E-mail Address Enter an e-mail address (up to 128
characters).
-
Recipient Name Enter a recipient name (up to 18
characters).
-
Index Enter a single alphanumeric character to
search the Address Book.
-
Communication Mode Select a communication mode from
among [G3 Auto], [F4800], and [G4 Auto].
This feature is not available for iFax
recipients. However, the selected mode is
applied to another iFax machine which is
used as a relay station for fax
transmission.
G3 Auto
Resolution Select a resolution level to be used for
transmission, from among [Panel],
[Standard], [Fine], [Superfine (400dpi)],
and [Superfine (600dpi)]. With [Panel]
selected, the resolution level selected on
the control panel is used.
Panel
Maximum Image Size Select the maximum image size,
depending on recipient's paper size, from
among [A3], [B4], and [A4]; or among [8.5
x 11"], B4, and [11 x 17"] (depending on
the country).
11 x 17"
Item Description Default
Downloaded From ManualsPrinter.com Manuals