Xerox WorkCentre 7132

15 Problem Solving
408 Xerox WorkCentre 7132 User Guide
016-728 The TIFF file contains unsupported tags. Check the print data.
016-729 The TIFF file could not be printed, because the number of colors and resolution
of the TIFF file exceeded the limit. Change the number of colors and resolution
of the TIFF file, and instruct it to print again.
016-731 Printing of the TIFF data was interrupted. Instruct it to print again.
016-732 The form specified in the emulation setting is not registered in the host
computer. Resend the form data.
016-733 • Could not acquire the IP address from the text string after the @ character in
an e-mail address. Enter the mail address correctly.
• The DNS internet address after the @ character could not be resolved. Enter
the DNS server address correctly.
016-734 Printing a simple recipient result report failed. Set the [E-mail Receive Protocol]
on the sender’s end to [SMTP].
016-735 An attempt was made to print a job template while it was being updated. Wait a
while, and then instruct it to print again.
016-736 Data is not stored in a forwarding address directory.
• Check that there is space on the target disk.
• Check the directory access permissions.
• Delete any [.LCK] lock files in the target directory.
016-737 Data is not stored in a forwarding address directory. Delete any [.LCK] lock files
in the target directory.
016-741 Unable to move onto the downloading mode.
016-742 Detected mismatching downloaded data product ID due to corrupt downloaded
data. Try downloading again.
016-744 An error occurred to the data being downloaded. Check if the connection
between the external device and the machine is secured, and try executing the
operation again.
016-745 An XPJL error occurred while downloading. Try executing the job again. Contact
the Xerox Welcome Center if the problem persists.
016-746 Received a PDF file that contains unsupported functions. Use a print driver to
print the file.
016-747 An error occurred while processing the annotation image data due to insufficient
memory. Take one of the following actions:
• Increase the annotation image size.
• Reduce the number of the images in [Repeat Image].
Contact the Xerox Welcome Center if the problem persists.
016-748 Unable to print due to insufficient hard disk space. Reduce the number of pages
in print data, for instance by dividing the print data, or by printing one copy at a
time when making multiple copies.
Code Description and Remedy
Downloaded From ManualsPrinter.com Manuals