6-6 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Error Messages
Command Error
Error -123 Exponent too large
The magnitude of the exponent was larger than 32000.
Error -124 Too many digits
The mantissa of a decimal numeric data contained more than 255 digits excluding
leading zeros.
Error -128 Numeric data not allowed
Numeric data is not allowed in this position for this command.
Error -130 Suffix error
An error was detected in the suffix. This error message is reported if the
4155C/4156C cannot determine the more specific suffix errors -131 through -138.
Error -131 Invalid suffix
The suffix does not follow the correct syntax or the suffix is inappropriate.
Error -134 Suffix too long
The suffix contains more than 12 characters.
Error -138 Suffix not allowed
A suffix was received after a numeric parameter that does not allow suffixes.
Error -140 Character data error
An error was detected in a character parameter. This error message is reported if the
4155C/4156C cannot determine the more specific errors -141 through -148.
Error -141 Invalid character data
Either the character parameter contains an invalid character or the particular element
received is not valid for the command header.
Error -144 Character data too long
The character parameter contains more than 12 characters.
Error -148 Character data not allowed
A character parameter is not allowed for this position.
To Next Page
Loading...
Need help?
General
