Agilent Technologies 7000B Series User Manual

4 Triggering
106 InfiniiVision 7000B Series Oscilloscopes User’s Guide
Noise Rejection
Noise Rej adds additional hysteresis to the trigger circuitry. By increasing
the trigger hysteresis band, you reduce the possibility of triggering on
noise. However, this also decreases the trigger sensitivity so that a slightly
larger signal is required to trigger the oscilloscope.
1 Press [Mode/Coupling] > HF Reject.

Agilent Technologies 7000B Series Specifications

General

Brand	Agilent Technologies
Model	7000B Series
Category	Test Equipment
Language	English