18 Oscilloscope Utility Settings
382 InfiniiVision 7000B Series Oscilloscopes User’s Guide
Configuring the [Quick Action] Key
The [Quick Action] key lets you perform common, repetitive actions by
pressing a single key.
To configure the [Quick Action] key:
1 Press [Utility] > Quick Action > Action; then, select the action that should be
performed:
• Off — disables the [Quick Action] key.
• Quick Print — prints the current screen image. Press Settings to set up
the printing options. See “Printing Screens” on page 220.
• Quick Save — saves setups, screen images, or data. Press Settings to set
up the save options. See “Saving and Recalling Data” on page 206.
• Quick Recall — recalls setups, traces, or masks. Press Settings to set up
the recall options. See “Saving and Recalling Data” on page 206.
• Quick Freeze Display — freezes the display without stopping acquisitions.
For more information, see “To freeze the display” on page 87.
Once the [Quick Action] key is configured, you simply press it to perform
the selected action.
To Next Page
Loading...
Need help?
General
