3 Displaying Waveforms
62 InfiniiVision 7000B Series Oscilloscopes User’s Guide
Using the Horizontal Controls
The horizontal controls include:
• The horizontal scale and position knobs.
• The [Horiz] key for accessing the Horizontal Menu.
• The zoom key for quickly enabling/disabling the split- screen zoom
display.
• The [Search] key for marking events in the serial decode Lister. See
“Searching Lister Data” on page 259.
• The [Navigate] keys for navigating time, marked events in the serial
decode Lister, and segmented memory acquisitions.
The following figure shows the Horizontal Menu which appears after
pressing the [Horiz] key.
The Horizontal Menu lets you select the time mode (Normal, XY, or Roll),
enable Zoom, set the time base fine control (vernier), and specify the time
reference.
The current sample rate is displayed above the Fine and Time Ref softkeys.
Normal
sweep mode
Zoom sweep
mode
Fine control
Trigger level
or threshold
Trigger
source
Delay
time
XY or Roll
mode
Time
reference
Sweep
speed
Trigger
point
Time
reference
Sample
rate
To Next Page
Loading...
Need help?
General
