Displaying Waveforms 3
InfiniiVision 7000B Series Oscilloscopes User’s Guide 93
To reset the label library to the factory default
1 Press [Utility] > Options > Preferences > More.
2 Press the Default Library softkey.
This will delete all user- defined labels from the library and set the
labels in the library back to the factory default. However, this does not
default the labels currently assigned to the channels (those labels that
appear in the waveform area).
Pressing the Default Library softkey will remove all user-defined labels from the library
and set the labels back to the factory default. Once deleted, these user-defined labels
cannot be recovered.
Defaulting labels without erasing the default library.
Pressing [Default Setup] sets all channel labels back to the default labels but does not
erase the list of user-defined labels in the library.
To Next Page
Loading...
Need help?
General
