Saving, Recalling, and Printing 6
InfiniiVision 7000B Series Oscilloscopes User’s Guide 209
Creating a new file name
1 Press the File Name softkey in the Save Menu. (You must have a USB
mass storage device connected to the oscilloscope for this softkey to be
active.)
2 Repeatedly turn and push the Entry knob to select letters and numbers
for the new file name. Or, you can press the Spell softkey and press the
Enter softkey to create the new file name.
3 You can press the Enter softkey or the Entry knob to move the cursor
forward within the file name.
4 You can press the Delete Character softkey to delete the current character
and shift the rest of the characters to the left.
5 When you select the Auto Increment option, the oscilloscope will add a
numeric suffix to your file name, and increment the number with each
successive save. It will truncate characters as necessary when the file
name length is at maximum and more digits are required for the
numeric portion of the file name.
6 Press the Press to Save softkey to save the file.
Saving Waveform Trace and Oscilloscope Setup
When the Trace & Setup option is selected from the Format softkey, both
waveform trace and oscilloscope setup are saved to the USB mass storage
device or the oscilloscope’s internal memory. After saving, you can choose
to recall the trace, the setup, or both.
The trace is saved with the file extension TIF and the setup is saved with
the extension SCP. These extensions can be seen using the File Explorer,
but they do not appear when using the file browser in the Recall Menu.
When using Mask Testing, the mask data file is saved also. Its extension is
MSK.
To Next Page
Loading...
Need help?
General
