Web Interface 8
InfiniiVision 7000B Series Oscilloscopes User’s Guide 249
Remote Programming with Agilent IO Libraries
While the SCPI Commands applet window lets you enter and remote
programming commands, remote programming for automated test and data
acquisition is typically done using the Agilent IO Libraries, which are
separate from the instrument’s web interface.
The Agilent IO Libraries let a controller PC communicate with Agilent
InfiniiVision oscilloscopes via their LAN or USB interfaces.
The Automation Ready CD provided with the oscilloscope contains the
Agilent IO Libraries Suite connectivity software to enable communication
over these interfaces. Refer to the instructions provided on the CD-ROM
to install this software on your PC. If you do not have the Automation
Ready CD you can download the Agilent IO Libraries Suite from
www.agilent.com/find/iolib.
Information about controlling the oscilloscope through remote commands
is contained in the Programmer’s Guide, which is included on the
documentation CD supplied with this oscilloscope. You can also access this
document on the Agilent web site.
For more information about connecting to the oscilloscope, refer to the
Agilent Technologies USB/LAN/GPIB Interfaces Connectivity Guide. For a
printable electronic copy of the Connectivity Guide, direct your Web
browser to www.agilent.com and search for Connectivity Guide.
To Next Page
Loading...
Need help?
General
