EasyManua.ls Logo

Agilent Technologies 7000B Series - Environmental Conditions

Agilent Technologies 7000B Series
432 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference 19
InfiniiVision 7000B Series Oscilloscopes User’s Guide 413
Environmental Conditions
Environment Indoor use only.
Ambient temperature Operating –10 °C to +55 °C;
non- operating –40 °C to +70 °C
Humidity Operating 95% RH at 40 °C for 24 hr; non- operating 90% RH at
65 °C for 24 hr
Altitude Operating to 4,570 m (15,000 ft); non- operating to 15,244 m
(50,000 ft)
Overvoltage Category This product is intended to be powered by MAINS
that comply to Overvoltage Category II, which is typical of cord-and- plug
connected equipment.
Pollution Degree The InfiniiVision scilloscopes may be operated in
environments of Pollution Degree 2 (or Pollution Degree 1).
Pollution Degree Definitions Pollution Degree 1: No pollution or only dry,
non- conductive pollution occurs. The pollution has no influence. Example:
A clean room or climate controlled office environment.
Pollution Degree 2. Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation may occur.
Example: General indoor environment.
Pollution Degree 3: Conductive pollution occurs, or dry, non- conductive
pollution occurs which becomes conductive due to condensation which is
expected. Example: Sheltered outdoor environment.

Table of Contents

Related product manuals