Agilent Technologies 7000B Series User Manual

 51
Agilent InfiniiVision 7000B Series Oscilloscopes
User’s Guide
2
Probing the Device Under Test
Analog Input Impedance (50 Ohm or 1 MOhm) 52
AutoProbe Interface 52
Passive Probes 53
Active Probes 53
Connect the Probes to the Oscilloscope 55
Compensating Passive Probes 56
Calibrating Probes 57
Manually Setting the Probe Attenuation Factor 59
Digital Probes 60
This chapter explains how to connect the oscilloscope to your device
under test (DUT) using probes.

Agilent Technologies 7000B Series Specifications

General

Brand	Agilent Technologies
Model	7000B Series
Category	Test Equipment
Language	English