Web Interface 8
InfiniiVision 7000B Series Oscilloscopes User’s Guide 253
Setting a Password
Whenever you connect the oscilloscope to a LAN, it is good practice to set
a password. The password prevents someone from remotely accessing the
oscilloscope via a Web browser and changing parameters. Remote users
can still view the Welcome screen, view network status, etc., but they can’t
operate the instrument or change its setup without the password.
To set a password:
1 Access the oscilloscope’s web interface (see “Accessing the Web
Interface” on page 244).
2 When the oscilloscope’s web interface is displayed, select the Configure
Network tab from the instrument’s Welcome page.
3 Click the Modify Configuration button.
To Next Page
Loading...
