Getting Started 1
InfiniiVision 7000B Series Oscilloscopes User’s Guide 49
Access the Built-In Quick Help
To view Quick Help
1 Press and hold the key or softkey for which you would like to view
help.
By default, Quick Help remains on the screen until another key is pressed
or a knob is turned. You can set Quick Help to close when you release the
key. Press the [Help] key, then press the Language softkey, then press the
Help softkey and select either Close on Release or Remain on Screen ([Help] >
Language > Help).
Press and Hold Front Panel Key or Softkey
(or Right-Click Softkey when using Web browser control)
Quick Help Message
To Next Page
Loading...
