Web Interface 8
InfiniiVision 7000B Series Oscilloscopes User’s Guide 247
Scrolling and Monitor Resolution
When using a monitor resolution of 1024 x 768 or less on the remote
computer, you need to scroll to access the full remote front panel. To
display the remote front panel without scroll bars, use a monitor
resolution greater than 1024 x 768 on your computer’s display.
Remote Programming
To send remote programming commands to the oscilloscope via the SCPI
Commands applet window:
1 Access the oscilloscope’s web interface (see “Accessing the Web
Interface” on page 244).
2 When the oscilloscope’s web interface is displayed, select
Browser Web Control, then select Remote Programming.
3 On the Remote Programming page, click SCPI Commands....
The SCPI Commands applet window appears.
To Next Page
Loading...
