Agilent Technologies 7000B Series User Manual

InfiniiVision 7000B Series Oscilloscopes User’s Guide 21
Figures
Figure 1. Interpreting the oscilloscope display 48
Figure 2. Example of centering a signal on the display 67
Figure 3. Signal centered on the display 67
Figure 4. Cursors set on displayed signal 68
Figure 5. Cursors set to center of signal 69
Figure 6. Signals are 90 out of phase 70
Figure 7. Signals are in phase 71
Figure 8. Amplitude Modulation Shown at 100% Intensity 84
Figure 9. Amplitude Modulation Shown at 40% Intensity 85
Figure 10. 15 ns Narrow Pulse, 20 ms/div, Normal Mode 120
Figure 11. 15 ns Narrow Pulse, 20 ms/div, Peak Detect Mode 121
Figure 12. Sequence Trigger Flowchart 131
Figure 13. Example: Triggering on Line 136 143
Figure 14. Triggering on All Lines 144
Figure 15. Triggering on Field 1 145
Figure 16. Triggering on All Fields 146
Figure 17. Triggering on Color Field 1 Alternating with Color Field 3 148
Figure 18. Using TV Holdoff to Synchronize to Color Field 1 or 3 (Field 1
mode) 149
Figure 19. Isolating an event for Frequency measurement 164
Figure 20. Isolating area for Top measurement 174
Figure 21. Automatic Overshoot measurement 176
Figure 22. Cursors used to measure pulse widths other than middle threshold
points 180
Figure 23. Cursors measure frequency of pulse ringing 181
Figure 24. Cursors track Zoom sweep 181
Figure 25. Measuring pulse width with cursors 182
Figure 26. Moving the cursors together to check pulse width variations 182

Agilent Technologies 7000B Series Specifications

General

Brand	Agilent Technologies
Model	7000B Series
Category	Test Equipment
Language	English